For Automobile Parts & Toool cases - Taizhou Shengda Plastic Machinery Co., Ltd.

Technical Parameter		Hot for ducts, pipes, reservoirs, tool cases…			Hot for bus/car seats, bumpers, spoilers…
SPECS	UNIT	ZK-70A	ZK-70B	ZK-90A	ZK-90B	ZK-100B
Max. Product ref.	L	20	25	50	60	120
Machine Dimension(LxWxH)	M	4×2.3×2.7	4.2×2.3×3.2	5×3.1×3.2	5×3.1×3.9	6.5×3.3×4.4
Total Weight	Ton	4.5	5.5	7	9	11
Clamping Unit
Clamping Force	KN	160	160	300	300	500
Platen Opening Stroke	mm	250-850	250-800	350-1050	350-1050	400-1400
Max.Mold Size(WxH)	mm	520×600	520×600	700×1000	700×1000	900×1200
Mold Thickness	mm	260-400	250-400	360-500	360-500	410-750
Power
Hydraulic Motor	KW	7.5	15	15	15	15/22
Total Power	KW	40	53	63	70	85
Fan Power for Screw	KW	0.72	0.72	0.72	0.72	0.72
Air Pressure	Mpa	0.7	0.7	0.7	0.7	0.7
Air Consumption	㎥/min	0.9	0.9	0.9	0.9	0.9
Average Energy Consumption	KWH	20	25	28	35	38
Extruder Unit
Screw Diameter	mm	70	70	90	90	100
Screw L/D Ratio	L/D	25:1	25:1	25:1	25:1	30:1
Plasticizing Capacity	KG/HR	80	100	100	120	200
Number of Heating Zone	ZONE	4	4	4	4	5
Extruder Heating Power	KW	10	12.5	12.5	12.5	20
Extruder Motor	KW	15	15	22	30	45
Die
Number of Heating Zone	ZONE	3	3	3	5	5
Power of Die Heating	KW	4	15	7	20	25
Accumulator Capacity	L	2	4.4	5	6	15
Die Core Diameter	mm	50-250	50-250	50-350	50-350	50-500
Note: The data mentioned above are for reference only. Shengda reserves the rights of modification. Final machine details subject to each specific contract.