For Pontons & Solar Floats - Taizhou Shengda Plastic Machinery Co., Ltd.

Colorful HMI display

PLC Based easy operation

Multipoint parison thickness optimization

Preheat w/o people by PID timing boot

Bigger Platen Size

Linear Potentiometer

Platform with elevator

Harmony Hydraulic System

Nitrided 38 CrMOALA extruder

Safety sensor protection

Energy accumulator low consumption

Quick material changeover

Quick Modular Maintenance

Technical Parameter		Hot for Accessories		Hot for Single Element		Hot for Double Element & PV Farm
SPECS	UNIT	ZK-70A	ZK-70B	ZK-100B	ZK-110B	ZK-120B	ZK-135B
Max. Product ref.	L	20	25	120	160	220	1000
Machine Dimension(LxWxH)	M	4×2.3×2.7	4.2×2.3×3.2	6.5×3.3×4.4	7.5×3.3×4.6	7.5×3.2×5.1	7.5×3.8×6
Total Weight	Ton	4.5	5.5	11	18	22	35
Clamping Unit
Clamping Force	KN	160	160	500	700	1200	1800
Platen Opening Stroke	mm	250-850	250-800	400-1400	400-1400	600-1600	600-1800
Max.Mold Size(WxH)	mm	520×600	520×600	900×1200	1050×1600	1200×1600	1600×2000
Mold Thickness	mm	260-400	250-400	410-750	410-750	610-850	610-950
Power
Hydraulic Motor	KW	7.5	15	15/22	22/30	22/37	30/45
Total Power	KW	40	53	85	125	175	260
Fan Power for Screw	KW	0.72	0.72	0.72	0.72	0.72	1.08
Air Pressure	Mpa	0.7	0.7	0.7	0.7	0.7	0.7
Air Consumption	㎥/min	0.9	0.9	0.9	0.9	0.9	0.9
Average Energy Consumption	KWH	20	25	38	45	55	80
Extruder Unit
Screw Diameter	mm	70	70	100	110	120	135
Screw L/D Ratio	L/D	25:1	25:1	30:1	30:1	30:1	30:1
Plasticizing Capacity	KG/HR	80	100	200	240	280	350
Number of Heating Zone	ZONE	4	4	5	6	6	6
Extruder Heating Power	KW	10	12.5	20	36	40	42
Extruder Motor	KW	15	15	45	55/75	75/110	110/132
Die
Number of Heating Zone	ZONE	3	3	5	6	6	6
Power of Die Heating	KW	4	15	25	36	50	50
Accumulator Capacity	L	2	4.4	15	20	30	50
Accumulator Capacity	L	Upgrade opt. 3		Upgrade opt. 25		Upgrade opt. 35
Die Core Diameter	mm	50-250	50-250	50-500	50-500	50-650	200-800
Note: The data mentioned above are for reference only. Shengda reserves the rights of modification. Final machine details subject to each specific contract.