For Barrel & Containers - Taizhou Shengda Plastic Machinery Co., Ltd.

Automatic gripper

Colorful HMI display

PLC Based easy operation

Multipoint parison thickness optimization

Preheat w/o people by PID timing boot

Bigger Platen Size

Linear Potentiometer

Platform with elevator, easy changeover of mold

Harmony Hydraulic System

Nitrided 38 CrMOALA extruder

Safety sensor protection

Energy accumulator low consumption

Quick material changeover

Quick Modular Maintenance

Technical Parameter		Hot for Open Top	Hot for L Ring	Hot for small narrow containers	Hot for Cuboid containers or Drums		Hot for OT drums
SPECS	UNIT	ZK-110B	ZK-120B	ZK-70A	ZK-70B	ZK-90B	ZK-100B
Max. Product ref.	L	160	220	20	25	60	120
Machine Dimension(LxWxH)	M	7.5×3.3×4.6	7.5×3.2×5.1	4×2.3×2.7	4.2×2.3×3.2	5×3.1×3.9	6.5×3.3×4.4
Total Weight	Ton	18	22	4.5	5.5	9	11
Clamping Unit
Clamping Force	KN	700	1200	160	160	300	500
Platen Opening Stroke	mm	400-1400	600-1600	250-850	250-800	350-1050	400-1400
Max.Mold Size(WxH)	mm	1050×1600	1200×1600	520×600	520×600	700×1000	900×1200
Mold Thickness	mm	410-750	610-850	260-400	250-400	360-500	410-750
Power
Hydraulic Motor	KW	22/30	22/37	7.5	15	15	15/22
Total Power	KW	125	175	40	53	70	85
Fan Power for Screw	KW	0.72	0.72	0.72	0.72	0.72	0.72
Air Pressure	Mpa	0.7	0.7	0.7	0.7	0.7	0.7
Air Consumption	㎥/min	0.9	0.9	0.9	0.9	0.9	0.9
Average Energy Consumption	KWH	45	55	20	25	35	38
Extruder Unit
Screw Diameter	mm	110	120	70	70	90	100
Screw L/D Ratio	L/D	30:1	30:1	25:1	25:1	25:1	30:1
Plasticizing Capacity	KG/HR	240	280	80	100	120	200
Number of Heating Zone	ZONE	6	6	4	4	4	5
Extruder Heating Power	KW	36	40	10	12.5	12.5	20
Extruder Motor	KW	55/75	75/110	15	15	30	45
Die
Number of Heating Zone	ZONE	6	6	3	3	5	5
Power of Die Heating	KW	36	50	4	15	20	25
Accumulator Capacity	L	20	30	2	4.4	6	15
Die Core Diameter	mm	50-500	50-650	50-250	50-250	50-350	50-500
Note: The data mentioned above are for reference only. Shengda reserves the rights of modification. Final machine details subject to each specific contract.

Back